Gabe

the point is its not a problem with my cooling its a problem with what the temp senors are reading, even at stock my temps are the same

thats not the point, lol

Sup everyone, I have a soltek K8TPRO-939 mobo and a amd athlon 64 3000+ Iam overclocked to 9x 267(2.40ghz) with my vcore at 1.55v but my temps are kinda high, and I dont know if the probes are reading to high or what but my cpu temps is about 55c idle and 63c load, I have a great cooling case with 2 PSU fans, 3 fans in the back of my case, 2 on my video card, 1 in the clear side pannel, and 3 in the front and 1 on the cpu with stock HSF, 12 fans in all. My motherboard is 34c idle, I just dont get why I have such a high cpu temp, my vcore is not even that high, and when I do lower my vcore wich causes instability at 2.4ghz my temps dont lower much at all, I dont know if Iam putting to much thermal paste on I dont really think I am, or if the probes that read my temps are crappy or arent working correctly, also when I touch heatsync its like berly warm at all, its about as warm as touching the palm of my hand, I just dont know if I should raise my vcore anymore to oc higher, I know that a 64's turn off the pc when the temp reaches a certian point. Next weard thing is for my htt ratio, anything higher then 200(1x) I get instability at 2.4ghz, I should be able to put my htt ratio at 600(3x) and be stable, anyway, let me know. thanks in advance!

I have some pictures of my pc here: ftp://www.futuredesigns.no-ip.com goto the Gabes Folder

ok, thats the way I set it up, I have it on like a foot and a half stand though

I got my new case in today, Iam not sure how to arange my fans, the case has 2 80mm fan spots in the back, two in the front, and one on the side, I really need some quick answers cuz I really want to see how this looks, Iam thinking I should have the two fans in the back as intake so I have cool air blowing over my cpu,(my cpu does have a fan and heatsync,lol) and then the one on the side of my case in the clear window its mounted to blow around my pci slots/agp card so that will be intake, then the front two where my hard drives are going to go Iam thinking exaust. the link below is my case: http://www.tigerdirect.com/applications/Se...=664269&CatId=0

I see

hasent that been out for a few months? iam about to switch to all amd in a week or two

Iam not sure if anyone cares, seems like a mostly hardware forum, figured I'd say hi and post something that has to do with software, so heres a hi and some screenshots of me installing windows longhorn 4074 onto virtual pc 2004(virtual pc has the latest service pack) I guss not many people have been able to put longhorn on virtual pc, but I did ScreenShot 1 ScreenShot 2 ScreenShot 3

k, thanks for the info.

k, thanks for the info. Thinking I might go with the p4c800 series motherboard.

Sup everyone, I've been getting poor proformance from pritty much any video card, and we nerrowed it down to be my motherboard, so asus says theres something wrong with it and we can send it back, probally get the same mobo again, or get something else from them and pay the difference, the mobo I have now with the problems is a asus p4r800-v deluxe. what I want to do with this new mobo that Iam getting is, not make the same mistake twice, get a mobo thats good/made for overclocking, and get something thats wellknown and has alot of support for it, I think I want a intel chipset, and of course it must be made by asus, let me know guys.

I would try reinstalling internet explorer, if your running windows xp, goto Start>Control Pannel>Add or Remove Programs> click "Add/Remove Windows Components" on the left of that window, then a box should come up and Internet Explorer will be listed in that list of apps, uncheck it and click next, then when its done I would restart the computer just to be safe, then repeat all that up to the part where you click "Add/Remove Windows Components" and check that box Internet Explorer and hit next again, restart the computer and see if you still have the problem, goodluck!

yea, heh, I actually just started using VNC earlyer today before you said, its all working now

Hey everyone, I got a server running windows 2000 server edition and I use termanal services to log in and manage it, but when I try loging in, I get this error message: The only way I can fix the problem is just doing a hard restart on the computer, since its in the next room over, it doesent have a monitor though, when you log out of termanal services, should I goto Start>Shutdown>disconnect then ok, or insted of using disconnect should I use "log of gabe" opition? this is all in that drop down box that you get when clicking the shutdown button, you get like, shutdown/restart/log of gabe/disconnect, I think thats all of them, please let me know, its getting really anoying, if you guys dont know how to fix it do you know a different program that will give me remote management like this