Z3RO March 21, 2006 Share Z3RO Member March 21, 2006 ok so im new to this and was trying to make a simple map just somthing to open up on source. im having to problems im getting 2 error codes 1 being invalid spwan points. ive tried moving them all over with the same results. the other is tht none of my lights work. forz said tht it might be tht i have a leak but i made shure it was all sealed up. im just trying to figure out wuts wrong. also do i need to have hl2 fully installed to make the maps work correctlly becuase right now i only have css installed thnx in advance Link to comment Share on other sites More sharing options...
mookie March 21, 2006 Share mookie GC Alumni March 21, 2006 You probably don't need to have HL2 installed, but it's a possibility. You'll only get invalid spawns if the spawn points are touching something. Check to see if the little guys' feet are touching the ground, if they are just raise them up 1". They need to be above the ground, not touching at all (doesn't make sense but that's the way it is). Wherever you click to place the spawns should be ok, but once you start moving them it's possible they'll touch something. If none of your lights are working at all, make sure you're actually running RAD when you compile, it's the third thing down. Leaks should not cause problems with either of these things, but they will cause there to be only direct light after VIS fails. Link to comment Share on other sites More sharing options...
Z3RO March 21, 2006 Author Share Z3RO Member March 21, 2006 (edited) MABEY STEAM JUST HATES ME ILL TRY THIS WHN I GET HOME THIER IS ONE OTHER ERROR CODE BUT I DONT NO IT OFF THE TOP OF MY HEAD SOMETHING TO DO WITH FILES MISSING MY SPAWN POINT AR KINDA HANGING IN THE MIDDLE OFF THE ROOM TUCHING ABSLUTLEY NUTHING IS IT POSSIBLE THIER TO HIGH? Edited March 21, 2006 by Z3RO Link to comment Share on other sites More sharing options...
Z3RO March 22, 2006 Author Share Z3RO Member March 22, 2006 (edited) ok heres wut my CONSOLE SAYS: if it helps Game.dll loaded for "Counter-Strike: Source" CSoundEmitterSystem: Registered 835 sounds CResponseSystem: scripts/talker/response_rules.txt (15 rules, 76 criteria, and 16 responses) maxplayers set to 32 Heap: 256.00 Mb Parsed 359 text messages execing config.cfg cc_lang = Sound Initialization Set primary sound buffer format: yes Using secondary sound buffer 2 channel(s) 16 bits/sample 44100 samples/sec DirectSound initialized Sound sampling rate: 44100 1 CPU, Frequency: 2.0 Ghz, Features: AuthenticAMD SSE MMX 3DNow RDTSC CMOV FCMOV execing valve.rc material "vgui/servers/icon_secure_deny" not found --- Missing Vgui material vgui/servers/icon_secure_deny --- Missing Vgui material vgui/servers/icon_secure_deny execing game.cfg Network: IP 192.168.0.4, mode MP, dedicated No, ports 27015 SV / 27005 CL Spawn Server chris Begin loading faces (loads materials) End loading faces (loads materials) else execing skill1.cfg Executing listen server config file Summary: 199 resources total 12.56 Mb, 4.68 % of capacity CInstancedSceneResourceManager: 0 .vcds total 0 bytes, 0.00 % of capacity Created class baseline: 6 classes, 1059 bytes. 32 player server started couldn't exec listenserver.cfg Invalid terrorist spawnpoint at (-256.0,80.0,80.0) Invalid terrorist spawnpoint at (-256.0,64.0,64.0) Invalid counterterrorist spawnpoint at (-384.0,80.0,80.0) Invalid counterterrorist spawnpoint at (-384.0,80.0,80.0) Client Z3RO.gc connected (127.0.0.1:27005). Connected to 127.0.0.1:27015 Compressing fragments (25637 -> 12321 bytes) Adding master server 207.173.177.11:27011 Adding master server 69.28.151.162:27011 Counter-Strike: Source Map: chris Players: 1 / 32 Build 2687 Server Number 1 Initializing renderer... Couldn't find customization file 'sound/player/jingle.wav'. Compressing fragments (2612 -> 2289 bytes) Error! CMapOverview::SetMap: couldn't load file resource/overviews/chris.txt. "materials/Effects/FilmScan256.vtf": can't be found on disk "materials/Effects/Splotches256.vtf": can't be found on disk Compressing fragments (1320 -> 901 bytes) Z3RO.gc connected Signon traffic "CLIENT": incoming 16.232 Kb, outgoing 991 bytes "materials/Effects/FilmScan256.vtf": can't be found on disk "materials/Effects/Splotches256.vtf": can't be found on disk Edited March 22, 2006 by Z3RO Link to comment Share on other sites More sharing options...
Ice_Berge_00 March 22, 2006 Share Ice_Berge_00 GC Alumni March 22, 2006 It sounds like you've definately got a those spawn points intersecting with objects, make sure you've got enough room between spawn points and above and below them as well. Use the entity report to select each CT and T spawn point nad verify their position. Maybe you've got a couple in strange places, happened to me before... Link to comment Share on other sites More sharing options...
Z3RO March 22, 2006 Author Share Z3RO Member March 22, 2006 thier relly all in the wid open thier is nuthing in the room fot them to tuch im at a loss im gonna try installign hl2 and see if tht has any effect and tht still doesnt explain why thier are no lights in my map Link to comment Share on other sites More sharing options...
Ice_Berge_00 March 23, 2006 Share Ice_Berge_00 GC Alumni March 23, 2006 Last resort on your spawn points, delete each one using the entity report list. That way you can make sure you get them all. Then re-add them again. Link to comment Share on other sites More sharing options...
mookie March 23, 2006 Share mookie GC Alumni March 23, 2006 Invalid terrorist spawnpoint at (-256.0,80.0,80.0)Invalid terrorist spawnpoint at (-256.0,64.0,64.0) Invalid counterterrorist spawnpoint at (-384.0,80.0,80.0) Invalid counterterrorist spawnpoint at (-384.0,80.0,80.0) Seems like maybe you have spawnpoints that touch each other. Looks to me like two CT Spawns at exactly the same location, and two T spawns separated by only about 24" (should probably be more than 32" apart). Link to comment Share on other sites More sharing options...
Z3RO March 25, 2006 Author Share Z3RO Member March 25, 2006 material "vgui/servers/icon_secure_deny" not found i searched this error code on hammers hlp site andit says tht my system has a bug and has some ones gehtto walck through on how to find the bug. needless to say thier wasnt enough info for me to do it so if any one could tell me how i would appiciate it Link to comment Share on other sites More sharing options...
mookie March 26, 2006 Share mookie GC Alumni March 26, 2006 material "vgui/servers/icon_secure_deny" not found i searched this error code on hammers hlp site andit says tht my system has a bug and has some ones gehtto walck through on how to find the bug. needless to say thier wasnt enough info for me to do it so if any one could tell me how i would appiciate it I don't think you need to worry about that one, it probably has nothing to do with your map anyway. Link to comment Share on other sites More sharing options...
Z3RO March 26, 2006 Author Share Z3RO Member March 26, 2006 idk thn ive tryed and tryed agin with no positive results Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now