who gets the highest fps here?

[Guest happyman]

i get 60-200fps in a 10on10 server.

 

amd 64 3000+ oc 240*10=2.4G

x800pro (550/1.1g)

 

 

still suffering from the low fps sometimes

[All Kill3r]

prob urK?!?, he has an x800XT.

 

i use an x800pro 500/1.1 - 3.0c 235x15 and play in 1280x1024 in our 20man servers. Fps sound the same as yours, i'm usually close or on my cap of 90fps, but there have times when i drop as low as 40's.

[spiralstairs]

i got a similar set up to y'all, 3.2 ghz pentium, x800 pro, with all settings at high and at 1280 X 1024 i get 60 fps steady (sometimes droppin to the 40s during heavy firefights with lots of physics action and all that goin on).

 

its weird, even if i change the max fps and make it higher than 60, my fps just WILL NOT go over 60 . can someone explain this to me?

 

i even tried lowering settings to medium, and changing the resolution to 800 X 600 and my fps got worse (not even close to steady 60 fps).

 

whats goin on here?

[Sontek]

I have a p4 1.4ghz with 512mb sdram and a ti4200 64mb ~

[All Kill3r]

i got a similar set up to y'all, 3.2 ghz pentium, x800 pro, with all settings at high and at 1280 X 1024 i get 60 fps steady (sometimes droppin to the 40s during heavy firefights with lots of physics action and all that goin on).

 

its weird, even if i change the max fps and make it higher than 60, my fps just WILL NOT go over 60 .  can someone explain this to me?

 

i even tried lowering settings to medium, and changing the resolution to 800 X 600 and my fps got worse (not even close to steady 60 fps).

 

whats goin on here?

<{POST_SNAPBACK}>

 

vsync off ?

[urk?!?]

90-120 fps solid except for spawn on Dust and Italy--which for some reason cause me to dip to 45. Must be a texturing issue that I haven't bothered to troubleshoot. (I'll spike to 300fps when I'm staring at the wall 2 inches from my face, but I don't think that counts ;p)

 

X800XT

P4-2.8C (800fsb)

1GB of Corsair XMS LLS (2.5,3,3,6)

SATA 160gb disk

 

1024x768 Everything on.

 

Spiral, turn Vsync off. And install Powerstrip so that you can set your monitor refresh higher. 60hz gives me headaches from the tearing on the screen.

[Guest zerodamage]

Maybe that is my problem. I used to play 1280 x 1024 but that seemed too high after the game went official. Now I play at 1280 x 960 which allows me higher settings and reasonable framerates. 1024 x 768 is too grainy for me.

 

I could play Dust in the beta at 1280 x 1024 with 4xaa 16xaf with all on high and maintain 100+ fps all the time. now dust has terrible fps. Valve changed something.

[Guest zerodamage]

My system:

 

Athlon 64 3200 (2.2 Ghz)

1-gig Geil PC3500 RAm

400 fsb

x800 XT (A pro but has 16 pipes like an XT clocked at 500/500)

 

Maybe an OC will help my system out some.

[appalachian_fox]

Hrm, well, I play Dune 2 on my computer, and I get way more FPS than Counter-Strike. I run an Intel 66 MHz 486 with a pair of 8 MB 72-pin SIMMs (16 MB) and a 512 MB HDD on a 66 MHz IDE bus. I also have a 4x CD drive in my system, but Dune 2 uses 6 floppies (3 1/2, baby, yeah). I souped up the video with a 12MB 3DfxVoodoo Video card (VLB for max performance). Formerly I had a HiQ VLB graphics accelerator in-line with an older 1 MB ISA video card.

 

Dune 2. Way more FPS than Counter-Strike.

[Clueless]

I get between 40 - 80 most of the time which seems fine. With no action it goes over 100 but that doesnt even count really.

 

Athlon64 3000+

512 mb PC3200

X800 XT Platinum

 

What is that Powerstrip that was referred to above?

[Mad Bean]

What is that Powerstrip that was referred to above?

<{POST_SNAPBACK}>

 

And install Powerstrip so that you can set your monitor refresh higher. 60hz gives me headaches from the tearing on the screen.

<{POST_SNAPBACK}>

 

Yea urK?!?, what's the 'Powerstrip'?

[ishmael]

barton 2500+

768 of 3200

ati 9200.

 

i average around 35 fps, dip down to below 30 sometimes..aztec kills me at a staggering 25. i run 1068x800 with high detail.

[spiralstairs]

90-120 fps solid except for spawn on Dust and Italy--which for some reason cause me to dip to 45. Must be a texturing issue that I haven't bothered to troubleshoot. (I'll spike to 300fps when I'm staring at the wall 2 inches from my face, but I don't think that counts ;p)

 

X800XT

P4-2.8C (800fsb)

1GB of Corsair XMS LLS (2.5,3,3,6)

SATA 160gb disk

 

1024x768 Everything on.

 

Spiral, turn Vsync off. And install Powerstrip so that you can set your monitor refresh higher. 60hz gives me headaches from the tearing on the screen.

<{POST_SNAPBACK}>

 

i turned V-sync off. I do have lots of tearing, and I just downloaded powerstrip. What should I change the setting to from 60 hz? Source on my comp is really choppy, i dont get it. it might be my wireless connexion.

[NOFX]

wow...

 

p4 2.6@3.0Ghz

9500 pro barely OC'd to 300Mhz core and mem

1 gig RAM

 

I run at 1152x864 everything on high except shadows and Id say my avg would be 55-65, depending on how much is being displayed. Heavy fire I might drop to 45 maybe, but never below

[Guest zerodamage]

I would turn on shadows somehow. I've killed fatty many times because I could see his shadow sticking out (like on Cobble).

[Fatty]

once you twit!

 

once and now it's many times

 

yer so ded

[Guest zerodamage]

once you twit!

 

once and now it's many times

 

yer so ded

<{POST_SNAPBACK}>

 

 

How dare you read this and correct me!

[Sword6]

I am running a P4 3.6 GHz, 2 Gigs, Kingston Hyper X ram, pc533, with 800mz FSB HT, PCI express Mobo, with 2X Geforce 6800 Ultra OC SLI config, with a Audigy 2 sound card, and two Raptor 1000 rpm 60gig, HD in Raid.

 

With that all things maxed out on my System I am getting between 284 - 330 Fps.

 

Sword 6

[urk?!?]

This: http://entechtaiwan.net/util/ps.shtm

 

is powerstrip. Takes a lil doing to figure it out. But you can force gamma adjustments out of game, force your monitor refresh to the max on your monitor as well as tweak settings for specific games (AA, AAF etc).

[Acid-Flux]

anywhere from 60-200, usually around 90-110 though

 

System:

 

amd-64bit 3000+

gig ram

9500 pro.

[SupaFly]

around 50-60

Dips down in heavy firefights...

 

AMD Athalon XP 2200

1 Gig Corsair RAM

ATI 9800 PRO 256 Meg version

[General J]

I am running a P4 3.6 GHz, 2 Gigs, Kingston Hyper X ram, pc533, with 800mz FSB HT, PCI express Mobo, with 2X Geforce 6800 Ultra OC SLI config, with a Audigy 2 sound card, and two Raptor 1000 rpm 60gig, HD in Raid. 

 

With that all things maxed out on my System I am getting between 284 - 330 Fps.

 

Sword 6

<{POST_SNAPBACK}>

Would have to say this is definitly the highest!

 

I have -

AMD Athlon XP 2600+ Barton @ 2.2ghz

ATI 9600XT

1 gb ram 3200

 

Running at 800x600 with high quality, lower end AA and AF, I am averaging around 60. I have it capped there, but if I turn it off, I get a range anywhere from 130-35.

 

So what is holding us all back? Seems like most of us are getting 50-70 fps. I am pretty sure most of my problem is my vid card. Would definitly benefit from a 256mb, extra pipeline card like an x800. When will we start seeing 512mb vid cards?

[d3atH-w|$h]

i get 110 fps avg...might go down to 90

 

system:

 

nvidia Geforce 6800 GT 256mb

 

1 gig kingston ram

 

p4 3.2 ghz

[d3atH-w|$h]

lol 512mb vid cards! cant wait till those come out for hl 3 or 4