akaM2 May 14, 2005 Share akaM2 Member May 14, 2005 he is my autoexec.cfg thought i would share it with everyone. I got it from Casey the admin in Cal-O, he posted it in there forums and I stoled it. BTW cl_interpolate 0 will make your screen shake, I have gotten used to it but it will make the player models move exactly where the hitboxes are. Also the // comments wont hurt anything, just showing you what everything means. *Word for the wise, paste the following into Notepad, and save the file as lowsettings.cfg or what ever you want in your Steam\SteamApps\your@email.com\counter-strike source\cstrike\cfg folder. Then when you start up CS before you go into a server you can just type, exec lowsettings.cfg and it will load them and if you dont like them then forget about it and never exec it again, but if you do, rename the file to autoexec.cfg This was last updated on 4/26 from Casey so any of the new changes from this update are not on here, but I will post up any changes. // _Set netcode settings_ // _adjusts hitboxes and netcode settings for optimal registration_ cl_cmdrate 101 cl_interp 0 cl_interpolate 0 cl_lagcomp_errorcheck 1 cl_lagcompensation 1 cl_updaterate 101 cl_rate 20000 cl_smooth 0 rate 25000 // _Set graphics settings_ // _adjusts graphics settings to boost framerate_ cl_ejectbrass 0 // _disables shells flying out of guns_ cl_forcepreload 1 cl_phys_props_enable 0 // _disables trash and cans etc_ cl_phys_props_max 0 // _disables trash and cans etc_ cl_radartype 1 // _solid radar_ cl_ragdoll_physics_enable 0 // _disables dead bodies_ cl_show_splashes 0 // _disables splashes when in water_ fps_max 101 // _caps FPS_ mat_bloom 0 mat_bumpmap 0 // _disables bumpmapping_ mat_clipz 0 // _lowers water quality_ mat_fastnobump 1 // _faster bump mapping_ mat_fastspecular 1 // _fast specular lighting_ mat_mipmaptextures 1 // _texture quality decreases with distance_ mat_picmip 2 // _lower texture quality--set between 0 and 2_ mat_specular 0 // _disables specular lighting_ mat_trilinear 0 // _disables trilinear filtering_ mp_decals 50 // _how many bullets etc will be shown_ muzzleflash_light 0 // _disables muzzleflash_ r_avglight 0 // _disables average lighting_ r_cheapwaterend 1 // _worse water rendering_ r_cheapwaterstart 1 // _worse water rendering_ r_decal_cullsize 2 // _lower texture quality at distance_ r_decals 0 // _disables player sprays_ r_dispfullradius 2 r_drawdetailprops 0 r_drawmodeldecals 0 // _disables decals on models_ r_dynamic 0 r_eyes 0 // _removes eyes from player models_ r_lightaverage 0 // _disables average lighting_ r_lightinterp 0 r_lod 5 // _adjusts model quality--set between -5 and 5_ r_propsmaxdist 100 // _lower object fading distance_ r_RainSplashPercentage 0 // _disables rain splashes_ r_renderoverlayfragment 0 r_rootlod 2 // _lower overall game detail level_ r_shadows 0 // _disables shadows (not recommended)_ r_teeth 0 // _removes teeth from player models_ r_waterforceexpensive 0 // _disables high-quality water_ rope_averagelight 0 // _disables average lighting on ropes_ rope_smooth 0 // _disables antialiasing on ropes_ rope_subdiv 0 rope_wind_dist 0 // _disables wind effects on ropes_ // _Set processing settings_ // _transfers load from GPU to CPU to boost performance r_3dnow 1 r_mmx 1 r_sse 1 r_sse2 1 // _Set audio settings_ // _increases audio performance and quality_ snd_mixahead .1 // _mixes sound ahead to reduce stuttering_ soundscape_fadetime 9999 // _helps lower background noise_ soundscape_flush // _helps lower background noise_ // _Set violence settings_ // _increases blood to help you see hits better_ violence_ablood 1 violence_agibs 1 violence_hblood 1 violence_hgibs 1 cl_show_bloodspray 1 // _Other settings_ budget_show_history 0 cl_crosshairalpha 999 cl_crosshairusealpha 1 jpeg_quality 100 sv_forcepreload 1 Link to comment Share on other sites More sharing options...
Sid May 14, 2005 Share Sid Member May 14, 2005 should i disable my cuton config before trying this, or use it in conjuction? Link to comment Share on other sites More sharing options...
akaM2 May 14, 2005 Author Share akaM2 Member May 14, 2005 I would say yes, try to just have this as your only config for visual settings, that way you can try just this out. I would remove this line from the config r_shadows 0 it helps to have those every now and then, and just wait till you see the bodies just poof into the air. Link to comment Share on other sites More sharing options...
Cold Killer}==> May 14, 2005 Share Cold Killer}==> Member May 14, 2005 u exspect us to use every1 single 1 of them Link to comment Share on other sites More sharing options...
akaM2 May 14, 2005 Author Share akaM2 Member May 14, 2005 yes Link to comment Share on other sites More sharing options...
VooDooPC May 14, 2005 Share VooDooPC Member May 14, 2005 Is it possible to call a config from another config? So perhaps i could have in my autoexec.cfg a line that says: exec lowsettings.cfg Will it load it? Link to comment Share on other sites More sharing options...
Laz.e.rus May 14, 2005 Share Laz.e.rus Member May 14, 2005 Hmm, muzzleflash disable? Is this in reference to YOUR flash that you see, or the flash of friends and enemies. I wouldnt want to disable others' flashes as it is the only guide for firing in smoke. Link to comment Share on other sites More sharing options...
VooDooPC May 14, 2005 Share VooDooPC Member May 14, 2005 It doesn't disable muzzle flash it disables the light the muzzle flash creates. Link to comment Share on other sites More sharing options...
Cold Killer}==> May 16, 2005 Share Cold Killer}==> Member May 16, 2005 if u were typing in some of these in the consul, dose it have to be on a server u r playing on ?i was wondering if i could start a source dedicated server and then just type it in there ,can i d this? Link to comment Share on other sites More sharing options...
VooDooPC May 16, 2005 Share VooDooPC Member May 16, 2005 You can type them in anywhere. You don't need to be in a server at all. Link to comment Share on other sites More sharing options...
Chamberlain May 17, 2005 Share Chamberlain Member May 17, 2005 I think these are settings to make everyone suck a bit more. Sneaky M2, leading kids on just so you can get some easier kills. jk Link to comment Share on other sites More sharing options...
h4ng0v3r May 17, 2005 Share h4ng0v3r Member May 17, 2005 I used the setting but i cant play with the interp and interpolate like that. Change your interp to .1 and interpolate to 1. I do use the rest of the settings and gameplay is a lot smoother and i get more shots register. Nice post M2. Link to comment Share on other sites More sharing options...
Fatty May 17, 2005 Share Fatty GC Founder May 17, 2005 Is it possible to call a config from another config? So perhaps i could have in my autoexec.cfg a line that says: exec lowsettings.cfg Will it load it? <{POST_SNAPBACK}> yes or you could just load it manually... however, if you don't have another file that "undoes" your settings, they'll stick. Link to comment Share on other sites More sharing options...
akaM2 May 17, 2005 Author Share akaM2 Member May 17, 2005 I used the setting but i cant play with the interp and interpolate like that. Change your interp to .1 and interpolate to 1. I do use the rest of the settings and gameplay is a lot smoother and i get more shots register. Nice post M2. <{POST_SNAPBACK}> now I will have to get killed by hang more Link to comment Share on other sites More sharing options...
Guest zerodamage May 18, 2005 Share Guest zerodamage Guests May 18, 2005 (edited) I have an issue with this: // _Set processing settings_// _transfers load from GPU to CPU to boost performance r_3dnow 1 r_mmx 1 r_sse 1 r_sse2 1 These do not transfer the load from the GPU. It tells the game to use performance enhancing features of the CPU and have nothing to do with video card performance at all. It's like using DirectX9 instead of DirectX 8.1 They basically do the same thing, just the DX9 does it better and faster. Turning on SSe1 and 2 and mmx tell the cpu to use these features for better performance in instances that the CPU is being used (Physics, AI, etc) Edited May 18, 2005 by zerodamage .gc Link to comment Share on other sites More sharing options...
*BiGBonES** June 9, 2005 Share *BiGBonES** Member June 9, 2005 Hey can anyone tell me what I need to change to get my flashlight back on. I can see other peoples light but not my own Link to comment Share on other sites More sharing options...
Rashad June 12, 2005 Share Rashad Member June 12, 2005 I'm having a similar problem, I can't see any sprays...which is a problem if your an admin and you can't see the porn sprays. Link to comment Share on other sites More sharing options...
Rashad June 12, 2005 Share Rashad Member June 12, 2005 n/m, i got it. Link to comment Share on other sites More sharing options...
*BiGBonES** June 12, 2005 Share *BiGBonES** Member June 12, 2005 hey, tell me what you changed to see sprays again. I had a big problem today in one of our EU clan matches. Cold killer wasn't on the roster, because i forgot to put him on, and after the match their guy realised what had happened. He was going to report this to the league admin, until I started blackmailing him Some of their players had porn sprays, but the idiot in my clan who said it didnt record a demo, and my demo doesn't show porn sprays because I cant see them So now I'm stuffed, but hopefully he won't call my bluff So, how do you get sprays to show up, and how do you get the flashligh back on??? Link to comment Share on other sites More sharing options...
Bush June 12, 2005 Share Bush Member June 12, 2005 hey, tell me what you changed to see sprays again. I had a big problem today in one of our EU clan matches. Cold killer wasn't on the roster, because i forgot to put him on, and after the match their guy realised what had happened. He was going to report this to the league admin, until I started blackmailing him Some of their players had porn sprays, but the idiot in my clan who said it didnt record a demo, and my demo doesn't show porn sprays because I cant see them So now I'm stuffed, but hopefully he won't call my bluff So, how do you get sprays to show up, and how do you get the flashligh back on??? <{POST_SNAPBACK}> r_decals 0 // _disables player sprays_ Turn it to 1. Link to comment Share on other sites More sharing options...
AlMiGhTy June 28, 2005 Share AlMiGhTy Member June 28, 2005 (edited) interp and interpolate are ilegal to change for league play when you mess with them its more of an aim bot not the shots registering better Edited June 28, 2005 by AlMiGhTy Link to comment Share on other sites More sharing options...
akaM2 June 28, 2005 Author Share akaM2 Member June 28, 2005 interp and interpolate are ilegal to change for league play when you mess with them its more of an aim bot not the shots registering better <{POST_SNAPBACK}> hahaha are you joking? Which leagues is it illeagal in? Cause im sure the CAL-Admin would not post this up if it was banned from CAL, also the CSP does not kick for it so where is it banned from? Link to comment Share on other sites More sharing options...
wayfarer June 28, 2005 Share wayfarer Member June 28, 2005 M2, I use cl_lagcomp_errorcheck 1 because mine is set at 0. I find this makes a big difference, but I have to change it every time I play. It always defaults back to 0. Anything I can do about this? Will this happen if I change all my settings to what you suggested? Also is there a way that I can save all of them as a setting so I can just type in one command and I can switch between default & these new settings without having to manually reset each & every one? Thank-You! P.K. Link to comment Share on other sites More sharing options...
Brillow_Head June 29, 2005 Share Brillow_Head Member June 29, 2005 I've been taking a HUGE hit on my fps lately. I'm talking in the 20 and 30s on a regular basis with everything on low settings. I usually ran in the 50's and only dipped into the 30's durring big firefights with smoke and rain (Aztec), and that was on default settings (mostly high). I run the vid stress test and average 114 pfs, which is about 20 pfs less than when I first got my headset (nothing has changed since them except fresh OS instal). I formated my comp before I moved and haven't installed anything net nasty. I run with all the cpu options on (r_sse r_sse2 r_3dnow r_mmx) and see no difference. I've got my fps set to 85 max but seldom gets there anymore. I'm very worried something in my system is taking a poo. My specs AMD Athlon64 3000+ AOPEN AK86-L Mobo (800 FSB) 1 GB Patriot High Performance DDR (PC3200 I think) BFG GF4 6800GT OC Tritton 5.1 Audio Thunder Headphones (USB) SB Audigy (drivers not installed cause of headphones and I'm lazy) wonder what's up?? Link to comment Share on other sites More sharing options...
VooDooPC June 29, 2005 Share VooDooPC Member June 29, 2005 (edited) Wayfarer, put all the commands in a .cfg file named anything you want, for example wayfarer.cfg, then go into the console and type exec wayfarer. Or you could make an autoexec.cfg file and put the commands in there, those will automaticly load. I think theres a exec config_default command to go back to default settings. Brillow, something is seriously wrong there. My system is: AthlonXP 2700+ 895 MBs of ram Gainward Geforce FX 5900 I have my settings at high and usually get 60+ FPS walking around and 20+ in big firefights.My max FPS is also set to 85 and i can walk around Aztec offline without dropping below max FPS most of the time.These commands helped my copmuter big time: cl_phys_props_enable 0 //gets rid of little junk cl_phys_props_max 0 //no idea what this does cl_ragdoll_physics_enable 1 //keeps ragdolls enabled i dont even need this cl_ragdoll_collide 1 //makes ragdolls collide with eachother wont help processor wise r_rainSimulate 0 //gets rid of aztec rain Edited June 29, 2005 by VooDooPC Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now