Bump up your fps and bullet registration

[akaM2]

he is my autoexec.cfg thought i would share it with everyone. I got it from Casey the admin in Cal-O, he posted it in there forums and I stoled it.

 

BTW cl_interpolate 0 will make your screen shake, I have gotten used to it but it will make the player models move exactly where the hitboxes are.

 

Also the // comments wont hurt anything, just showing you what everything means.

 

*Word for the wise, paste the following into Notepad, and save the file as lowsettings.cfg or what ever you want in your Steam\SteamApps\your@email.com\counter-strike source\cstrike\cfg folder. Then when you start up CS before you go into a server you can just type, exec lowsettings.cfg and it will load them and if you dont like them then forget about it and never exec it again, but if you do, rename the file to autoexec.cfg

 

This was last updated on 4/26 from Casey so any of the new changes from this update are not on here, but I will post up any changes.

 

// _Set netcode settings_

// _adjusts hitboxes and netcode settings for optimal registration_

cl_cmdrate 101

cl_interp 0

cl_interpolate 0

cl_lagcomp_errorcheck 1

cl_lagcompensation 1

cl_updaterate 101

cl_rate 20000

cl_smooth 0

rate 25000

 

// _Set graphics settings_

// _adjusts graphics settings to boost framerate_

cl_ejectbrass 0 // _disables shells flying out of guns_

cl_forcepreload 1

cl_phys_props_enable 0 // _disables trash and cans etc_

cl_phys_props_max 0 // _disables trash and cans etc_

cl_radartype 1 // _solid radar_

cl_ragdoll_physics_enable 0 // _disables dead bodies_

cl_show_splashes 0 // _disables splashes when in water_

fps_max 101 // _caps FPS_

mat_bloom 0

mat_bumpmap 0 // _disables bumpmapping_

mat_clipz 0 // _lowers water quality_

mat_fastnobump 1 // _faster bump mapping_

mat_fastspecular 1 // _fast specular lighting_

mat_mipmaptextures 1 // _texture quality decreases with distance_

mat_picmip 2 // _lower texture quality--set between 0 and 2_

mat_specular 0 // _disables specular lighting_

mat_trilinear 0 // _disables trilinear filtering_

mp_decals 50 // _how many bullets etc will be shown_

muzzleflash_light 0 // _disables muzzleflash_

r_avglight 0 // _disables average lighting_

r_cheapwaterend 1 // _worse water rendering_

r_cheapwaterstart 1 // _worse water rendering_

r_decal_cullsize 2 // _lower texture quality at distance_

r_decals 0 // _disables player sprays_

r_dispfullradius 2

r_drawdetailprops 0

r_drawmodeldecals 0 // _disables decals on models_

r_dynamic 0

r_eyes 0 // _removes eyes from player models_

r_lightaverage 0 // _disables average lighting_

r_lightinterp 0

r_lod 5 // _adjusts model quality--set between -5 and 5_

r_propsmaxdist 100 // _lower object fading distance_

r_RainSplashPercentage 0 // _disables rain splashes_

r_renderoverlayfragment 0

r_rootlod 2 // _lower overall game detail level_

r_shadows 0 // _disables shadows (not recommended)_

r_teeth 0 // _removes teeth from player models_

r_waterforceexpensive 0 // _disables high-quality water_

rope_averagelight 0 // _disables average lighting on ropes_

rope_smooth 0 // _disables antialiasing on ropes_

rope_subdiv 0

rope_wind_dist 0 // _disables wind effects on ropes_

 

// _Set processing settings_

// _transfers load from GPU to CPU to boost performance

r_3dnow 1

r_mmx 1

r_sse 1

r_sse2 1

 

// _Set audio settings_

// _increases audio performance and quality_

snd_mixahead .1 // _mixes sound ahead to reduce stuttering_

soundscape_fadetime 9999 // _helps lower background noise_

soundscape_flush // _helps lower background noise_

 

// _Set violence settings_

// _increases blood to help you see hits better_

violence_ablood 1

violence_agibs 1

violence_hblood 1

violence_hgibs 1

cl_show_bloodspray 1

 

// _Other settings_

budget_show_history 0

cl_crosshairalpha 999

cl_crosshairusealpha 1

jpeg_quality 100

sv_forcepreload 1

[Sid]

should i disable my cuton config before trying this, or use it in conjuction?

[akaM2]

I would say yes, try to just have this as your only config for visual settings, that way you can try just this out.

 

I would remove this line from the config

r_shadows 0

 

it helps to have those every now and then, and just wait till you see the bodies just poof into the air.

[Cold Killer}==>]

u exspect us to use every1 single 1 of them

[akaM2]

yes

[VooDooPC]

Is it possible to call a config from another config? So perhaps i could have in my autoexec.cfg a line that says:

 

exec lowsettings.cfg

 

Will it load it?

[Laz.e.rus]

Hmm, muzzleflash disable? Is this in reference to YOUR flash that you see, or the flash of friends and enemies. I wouldnt want to disable others' flashes as it is the only guide for firing in smoke.

[VooDooPC]

It doesn't disable muzzle flash it disables the light the muzzle flash creates.

[Cold Killer}==>]

if u were typing in some of these in the consul, dose it have to be on a server u r playing on ?i was wondering if i could start a source dedicated server and then just type it in there ,can i d this?

[VooDooPC]

You can type them in anywhere. You don't need to be in a server at all.

[Chamberlain]

I think these are settings to make everyone suck a bit more.

 

Sneaky M2, leading kids on just so you can get some easier kills. jk

[h4ng0v3r]

I used the setting but i cant play with the interp and interpolate like that. Change your interp to .1 and interpolate to 1. I do use the rest of the settings and gameplay is a lot smoother and i get more shots register. Nice post M2.

[Fatty]

Is it possible to call a config from another config? So perhaps i could have in my autoexec.cfg a line that says:

 

exec lowsettings.cfg

 

Will it load it?

<{POST_SNAPBACK}>

 

yes

 

 

or you could just load it manually...

 

however, if you don't have another file that "undoes" your settings, they'll stick.

[akaM2]

I used the setting but i cant play with the interp and interpolate like that.  Change your interp to .1 and interpolate to 1.  I do use the rest of the settings and gameplay is a lot smoother and i get more shots register.  Nice post M2.

<{POST_SNAPBACK}>

 

now I will have to get killed by hang more

[Guest zerodamage]

I have an issue with this:

 

// _Set processing settings_

// _transfers load from GPU to CPU to boost performance

r_3dnow 1

r_mmx 1

r_sse 1

r_sse2 1

 

These do not transfer the load from the GPU. It tells the game to use performance enhancing features of the CPU and have nothing to do with video card performance at all. It's like using DirectX9 instead of DirectX 8.1 They basically do the same thing, just the DX9 does it better and faster. Turning on SSe1 and 2 and mmx tell the cpu to use these features for better performance in instances that the CPU is being used (Physics, AI, etc)

Edited May 18, 2005 by zerodamage .gc

[*BiGBonES**]

Hey can anyone tell me what I need to change to get my flashlight back on. I can see other peoples light but not my own

[Rashad]

I'm having a similar problem, I can't see any sprays...which is a problem if your an admin and you can't see the porn sprays.

[Rashad]

n/m, i got it.

[*BiGBonES**]

hey, tell me what you changed to see sprays again.

 

I had a big problem today in one of our EU clan matches. Cold killer wasn't on the roster, because i forgot to put him on, and after the match their guy realised what had happened. He was going to report this to the league admin, until I started blackmailing him

 

Some of their players had porn sprays, but the idiot in my clan who said it didnt record a demo, and my demo doesn't show porn sprays because I cant see them

 

So now I'm stuffed, but hopefully he won't call my bluff

 

So, how do you get sprays to show up, and how do you get the flashligh back on???

[Bush]

hey, tell me what you changed to see sprays again.

 

I had a big problem today in one of our EU clan matches. Cold killer wasn't on the roster, because i forgot to put him on, and after the match their guy realised what had happened. He was going to report this to the league admin, until I started blackmailing him 

 

Some of their players had porn sprays, but the idiot in my clan who said it didnt record a demo, and my demo doesn't show porn sprays because I cant see them 

 

So now I'm stuffed, but hopefully he won't call my bluff 

 

So, how do you get sprays to show up, and how do you get the flashligh back on???

<{POST_SNAPBACK}>

r_decals 0 // _disables player sprays_

 

Turn it to 1.

[AlMiGhTy]

interp and interpolate are ilegal to change for league play when you mess with them its more of an aim bot not the shots registering better

Edited June 28, 2005 by AlMiGhTy

[akaM2]

interp and interpolate are ilegal to change for league play when you mess with them its more of an aim bot not the shots registering better

<{POST_SNAPBACK}>

 

 

 

hahaha are you joking? Which leagues is it illeagal in? Cause im sure the CAL-Admin would not post this up if it was banned from CAL, also the CSP does not kick for it so where is it banned from?

[wayfarer]

M2, I use cl_lagcomp_errorcheck 1 because mine is set at 0. I find this

makes a big difference, but I have to change it every time I play. It always

defaults back to 0. Anything I can do about this? Will this happen if I

change all my settings to what you suggested? Also is there a way that I

can save all of them as a setting so I can just type in one command and

I can switch between default & these new settings without having to

manually reset each & every one? Thank-You! P.K.

[Brillow_Head]

I've been taking a HUGE hit on my fps lately. I'm talking in the 20 and 30s on a regular basis with everything on low settings. I usually ran in the 50's and only dipped into the 30's durring big firefights with smoke and rain (Aztec), and that was on default settings (mostly high).

 

I run the vid stress test and average 114 pfs, which is about 20 pfs less than when I first got my headset (nothing has changed since them except fresh OS instal). I formated my comp before I moved and haven't installed anything net nasty. I run with all the cpu options on (r_sse r_sse2 r_3dnow r_mmx) and see no difference. I've got my fps set to 85 max but seldom gets there anymore. I'm very worried something in my system is taking a poo.

 

My specs

 

AMD Athlon64 3000+

AOPEN AK86-L Mobo (800 FSB)

1 GB Patriot High Performance DDR (PC3200 I think)

BFG GF4 6800GT OC

Tritton 5.1 Audio Thunder Headphones (USB)

SB Audigy (drivers not installed cause of headphones and I'm lazy)

 

 

wonder what's up??

[VooDooPC]

Wayfarer, put all the commands in a .cfg file named anything you want, for example wayfarer.cfg, then go into the console and type exec wayfarer. Or you could make an autoexec.cfg file and put the commands in there, those will automaticly load. I think theres a exec config_default command to go back to default settings.

 

Brillow, something is seriously wrong there. My system is:

 

AthlonXP 2700+

895 MBs of ram

Gainward Geforce FX 5900

 

I have my settings at high and usually get 60+ FPS walking around and 20+ in big firefights.My max FPS is also set to 85 and i can walk around Aztec offline without dropping below max FPS most of the time.These commands helped my copmuter big time:

 

cl_phys_props_enable 0 //gets rid of little junk

cl_phys_props_max 0 //no idea what this does

cl_ragdoll_physics_enable 1 //keeps ragdolls enabled i dont even need this

cl_ragdoll_collide 1 //makes ragdolls collide with eachother wont help processor wise

r_rainSimulate 0 //gets rid of aztec rain

Edited June 29, 2005 by VooDooPC