Shropshire Slasher April 6, 2005 Share Shropshire Slasher Member April 6, 2005 Must have for me. <{POST_SNAPBACK}> How can all you folks be complaining about shots not registering. I think everyone of you has owned me hard at some point or another... Link to comment Share on other sites More sharing options...
mongoloido April 28, 2005 Share mongoloido Member April 28, 2005 Could someone tell me where to put the autoexec.cfg file and what to adjust to get it to load? The link posted to an article seems dead. It took me to a register page, which I completed, then to a subscribe page, which sounds like they want money. Please help a poor mongo get his shots to register more often. Shooting someone with a pump shottie 4 times and having 1 shot register is a bit nutty for me. Link to comment Share on other sites More sharing options...
Mad Bean April 28, 2005 Share Mad Bean Member April 28, 2005 Put you autoexec.cfg in your cfg folder alongside your config.cfg. And you will want to add in your config folder 'exec autoconfig'. Hope that helps. Link to comment Share on other sites More sharing options...
mongoloido April 28, 2005 Share mongoloido Member April 28, 2005 Thanks. Working on it. Gotta do some shuffling to get the values right, I guess. Link to comment Share on other sites More sharing options...
Fatty April 28, 2005 Share Fatty GC Founder April 28, 2005 Put you autoexec.cfg in your cfg folder alongside your config.cfg. And you will want to add in your config folder 'exec autoconfig'. Hope that helps. <{POST_SNAPBACK}> Actually, the autoexec.cfg runs by itself without having to tell something to exec it. And nothing ever edits it! This is where I put any non-default settings and my name, rcon passes, etc... Link to comment Share on other sites More sharing options...
mongoloido April 28, 2005 Share mongoloido Member April 28, 2005 Actually, the autoexec.cfg runs by itself without having to tell something to exec it. And nothing ever edits it! This is where I put any non-default settings and my name, rcon passes, etc... <{POST_SNAPBACK}> Can't I just make my config.cfg read only and get the same thing? Link to comment Share on other sites More sharing options...
Fatty April 29, 2005 Share Fatty GC Founder April 29, 2005 Sure, it's just another way to organize stuff. Up to you. Link to comment Share on other sites More sharing options...
*BiGBonES** April 30, 2005 Share *BiGBonES** Member April 30, 2005 Just like mongo, i'm also a noob with this config stuff, but about 10x worse than him. So If i want to have these settings: budget_show_history "0" cl_ejectbrass "0" mat_bumpmap "0" mat_picmip "2" mat_specular "0" mp_decals "0" r_decals "20" muzzleflash_light "0" r_avglight"0" r_decals "0" r_dispfullradius "2" r_DispUseStaticMeshes "0" cl_smooth "0" fps_max "100" cl_lagcomp_errorcheck "1" cl_phys_props_enable "0" cl_show_splashes "0" cl_phys_props_max "0" violence_agibs "1" violence_hgibs "1" violence_hblood "1" violence_ablood "1" cl_show_bloodspray "1" r_sse2 "1" r_sse1 "1" r_mmx "1" How do i actually make them work? As far as im aware you go to C:/....counterstrike/cfg Then paste the commands into a notepad document, save it as 'autoexec.cfg' then it works? Am I correct, or has my computer knowledge pwned me? help would be appreciated! Link to comment Share on other sites More sharing options...
VooDooPC May 1, 2005 Share VooDooPC Member May 1, 2005 You are correct, thats exactly how it works! Link to comment Share on other sites More sharing options...
Vovik May 16, 2005 Share Vovik Member May 16, 2005 i'm trying this stuff today as i'm writing. so far, i felt like i was cheating at dust, then again i might have been lucky, but my frames went up 10-12 fps and it registers better. I'm trying to play around with these commands a little more thogh. Link to comment Share on other sites More sharing options...
Vovik May 16, 2005 Share Vovik Member May 16, 2005 budget_show_history "0"cl_ejectbrass "0" mat_bumpmap "0" mat_picmip "2" mat_specular "0" mp_decals "0" r_decals "20" muzzleflash_light "0" r_avglight"0" r_decals "0" r_dispfullradius "2" r_DispUseStaticMeshes "0" cl_smooth "0" fps_max "100" cl_lagcomp_errorcheck "1" cl_phys_props_enable "0" cl_show_splashes "0" cl_phys_props_max "0" violence_agibs "1" violence_hgibs "1" violence_hblood "1" violence_ablood "1" cl_show_bloodspray "1" r_sse2 "1" r_sse1 "1" r_mmx "1" ^^ My AUTOEXEC.CFG config. <{POST_SNAPBACK}> basically i put in this into my autoexec with exception of (mat_picmip "2") i left it at 0. My question is, my spray now either doesn't show at all or shows just for a second and disappears. Which command controls that? Link to comment Share on other sites More sharing options...
VooDooPC May 16, 2005 Share VooDooPC Member May 16, 2005 mp_decals or r_decals Link to comment Share on other sites More sharing options...
Vovik May 16, 2005 Share Vovik Member May 16, 2005 mp_decalsor r_decals <{POST_SNAPBACK}> that's what clueless told me during the game but what should it be set to to be normal? Link to comment Share on other sites More sharing options...
VooDooPC May 16, 2005 Share VooDooPC Member May 16, 2005 (edited) Mine are set to: mp_decals 3000.0000 r_decals 2084 Which is default i belive. Edited May 16, 2005 by VooDooPC Link to comment Share on other sites More sharing options...
Vovik May 16, 2005 Share Vovik Member May 16, 2005 ok thanx voodoo that worked Link to comment Share on other sites More sharing options...
AIMbot 2.0 BETA Tester August 23, 2005 Share AIMbot 2.0 BETA Tester Member August 23, 2005 I'd like to reset my config but the directions above aren't getting me anywhere. The autocongig.exe doesn't seem to be where it should be. Anyone agree? Link to comment Share on other sites More sharing options...
it3llig3nc3 January 3, 2006 Share it3llig3nc3 Member January 3, 2006 I found this topic and thought it might help to put up some explanation about the variables we're trying to tweak here. Maybe understanding them makes it easier to find the most appropriate value for everybody. Credits should go to www.nuclearfallout.net as I took this from their FAQ. (they are in general a server rental company... ...by far the best I have every dealt with). Q: How can I optimize my client settings (cvars) so gameplay is as smooth as possible? A: There are three main settings to look at on the client-side. These are rate, cl_updaterate, and cl_cmdrate. rate determines the speed, in bytes per second, that your client allows itself and the server to interact at. This setting is needed because your client has no idea how fast your connection is, and it doesn't know how to find out. The rate setting tells it the maximum speed at which it can transfer data. If it is set too high, your connection may not be able to handle it, and you will get packetloss; if it is set too low, choke and latency will increase, possibly making your game stutter or lag. Half-life is generally able to compensate for choke fairly well, as long as there is not much of it; however, when choke gets too high (over 100), it has to start dropping packets (and we all know how bad packetloss is!). I recommend a rate of 8000 or 10000, since most broadband connections can easily handle it (try 10000 first). cl_updaterate determines how many updates per second the client will accept when it is interacting with the server. A higher value can make gameplay more smooth, although it often makes your ping appear higher due to the added latencies on both ends from extra calculations involved. I recommend a cl_updaterate of 40, which I have found balances ping and smoothness fairly well. Feel free to try higher and lower values. A value too high can cause choke if your machine or your connection can't handle all the packets; a high value can also make your ping look much higher than it should be. Some people blindly set this variable to 101 -- that would be an example of a too-high value. cl_cmdrate determines how many commands your client sends to the server per second (such as moving, turning, jumping). I usually recommend that users set their cl_cmdrate cvar to the same value as cl_updaterate, because they are so similar. Too-high or too-low values (like 101) may lead to the infamous "shots not registering" problem and high values can also cause high in-game pings. © nuclearfallout.net: Nuclearfallout-FAQ-Lag Link to comment Share on other sites More sharing options...
DNA February 4, 2006 Share DNA Member February 4, 2006 Okay may not be right place but it will be the answer i cam looking for....New Card...Choices are 6800 or x850. These both would be AGP with 754 3.2 Please let me know what you all would do and why?? Link to comment Share on other sites More sharing options...
NorgmaN February 9, 2006 Share NorgmaN Member February 9, 2006 A couple different things, hopefully I remembered it all. To get you started http://www.freewebs.com/clans4h/autoexec.htm has both my config that I use, and another config that a teammate uses. The larger one is for people who have extremely bad fps problems. Mine works for just about every decent-extreme computer. Some things people were talking about, that I remember that I have comments to. cl_interp 0 and cl_interpolate 0 : Many of you said that the game is too shaky to use. If that is true, and it was for me at one time, only change the cl_interpolate command back to 1. Leave the interp command at 0 at all times, unless you are in a .CSP locked server. -dxlevel 80,81,90,95 : 95 is obviously the highest quality game. I use it on my comp, many people can't, it's all about what hardware you have and what clocking you do to the hardware. My reccomendation on this command is different from what some have said, which is that 81 is the best. Well that statement is half true. 80 is the lowest you should ever have to use, unless you have a 5 year old comp, then you shouldn't even play cs:s . Even I use 80 on train and inferno, just b/c those maps own your fps. When you change your launch options to -dxlevel xx it resets all of your gfx commands to align with the dxlevel you are telling the game to run in. To fix all of your gfx from getting reset, you need to: put the -dxlevel xx (80,90,95) command in the launch options. Load the game, go to options -> video -> advanced -> hit save, ok, then exit the game. Go back into the launch options, and delete the -dxlevel xx command. Now when you reload the game, it saves the dxlevel to your system, and doesn't reset the game gfx everytime you load. aka resolution, model quality, shadows, etc. Resolution 640,860,1024,1280+ : Pretty simple consept that many people forget about when talking about your fps. Basically the lower the resolution, the higher the fps will be. Now I know many people, inluding me, can't play in 860, or ever 640, but if you really need the frames, that is the resolution you need. 1024 is what I now use. 1280 is what I love to use, but it just eats your fps like a little gremlin. If you use anything above 1280, you need a super computer, or you just want to play w/ 5 fps all the time. I remember a post about someone saying they have a 3500 64bit and a ati850xt. Why you get apprx. 50fps is because of that 850. Yeah, I know its the best AGP card, I have a 6600gt AGP card. We are in the same boat. The reason for the huge difference in fps is b/c of 1 simple thing. A.G.P. It holds back so much of the information b/c AGP can only shoot in 8 lines between itself and the motherboard. Pci-E is 16, and only getting faster. So when you said something about why you need to lower everything, that is why, hopefully I rememberd that question correctly. If there is anything missed, that I forgot to comment on, leave a post and I'll try to help. I can usually figure out what is wrong with most computers. I've used just about every cfg and trick out there by now, so hopefully I can help you if you want the help. Specs: Abit NF7-S AMD 3000+ 400FSB (non 64) 1Gig Corsair pc3200 Nvidia GeForce 6600Gt (AGP) Normally on CS:S I get apprx 80FPS. But I like keeping my gfx high, so I could get more frame, but I'm content with 80. On some maps its 50(train, inferno, sometimes nuke), I usually change my dxlevel before-hand if I know I'm gonna play one of these maps. Aka, scrim or match. And as I said, if you need any help, I'm willing to help out, either post here, or you can contact me on irc.gamesurge.net, #s4h, s4h-NorgmaN or XFire - RNorgman@excite.com Oops I forgot about "rates". It's also another simple concept just like Resolution. Anyone w/ Broadband/Cable+ should use rate 25000, cl_cmdrate 100/101, cl_updaterate cl_100/101. Now, say your getting mad choke, aka 20+, then you take your cl_updaterate, and lower it to 80/90. If its still high, lower it more. and if you lower under 50, then its just a poopty server. For people w/ dialup... Just leave your rates at 2500,30,20. Not much you can do if you still have dialup, other then get Cable. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now